The Blackmagic 2110 IP SDI to HDMI 12G-10 is a full width converter that turns a 12G-SDI or SMPTE 2110 IP signal into an HDMI output, built for installations that need to feed multiple audio destinations rather than a single monitoring point. Ten balanced XLR audio outputs, each with its own level control and adjustable delay, let the same video feed drive a PA system or several rooms in sync with the picture.

A second 10G Ethernet port adds a layer of network flexibility beyond the standard SDI to HDMI model, with the same full ST 2110-20, -21, -30 and -40 compliance, PTP timing and NMOS IS-04/ IS-05 support. 3D LUT support keeps color accurate on the connected display, and a 2.2 inch front LCD with a control knob and buttons handles setup on site.

Highlights

Converts 12G-SDI or SMPTE 2110 IP to HDMI with 10 independent XLR audio outputs
Each audio output has its own level control and adjustable delay
Dual 10G Ethernet ports for added network flexibility
3D LUT support for accurate color on the connected display

- Product Identifiers -

MPN: CONVNVIPM/12G/HDMI10
EAN: 9338716010022

- Product Specifications -

Video I/O

SDI In	1 x 12G-SDI, with loop output
HDMI Out	1 x HDMI 2.0 with 3D LUT support
IP Connection	2 x 10G Ethernet, SMPTE 2110
Resolution	Up to UHD 4K, SD to 12G-SDI rates

Audio

ST 2110 Audio	16 channels in and out
Embedded Audio	16 channels SDI, 8 channels HDMI
Analog Audio Out	10 x balanced XLR, each with remote level control and adjustable delay
Monitoring	6.35mm headphone jack

Networking and Control

Standards	SMPTE 2110-20, -21, -30, -40; PTP (IEEE 1588-2008, ST 2059-1/2); NMOS IS-04, IS-05, BCP-002-01, BCP-004-01
Codec	Blackmagic IP10 for 2160p59.94/60
Control	4 buttons, spin knob, 2.2 inch color LCD; RJ-45 and USB-C
Webcam Output	USB-C, up to 1080p60

Power and Physical

Power	Internal 100-240V AC (IEC C14) plus 4-pin XLR 12V DC input
Form Factor	Full width, 1 rack unit
Operating Temperature	0 to 40 deg C
Warranty	1 year limited manufacturer warranty

Hassle Free Returns

At Motion Media, our goal is to ensure your complete satisfaction with your purchase. If, for whatever reason, you are dissatisfied with your purchase, you may return it to Motion Media within 30 days. Claims for missing items or items damaged in transit must be received within three business days of receipt of merchandise.

Refunds on returned items will be issued in the same payment form as tendered at the time of purchase. If payment was made by credit card, once we receive the product we will credit your account. Please allow 7-10 days for a credit to appear on your credit card statement. If payment was made by check, please allow 10 business days for a refund check to be issued.

Please read all conditions below. If conditions are not met, Motion Media reserves the right to refuse the return or to charge a restocking fee of up to 25%.

How to return or exchange an item:

In order to return an item you need to first obtain an RMA (Return Merchandise Authorization) number.
To request an RMA number, please visit our contact page and send us an email with the request.
To request an RMA number by phone, call Customer Service at 310-450-4000.
Place the original package into a shipping carton.
Include the invoice and the reason for the return. If defective, please specify the defect.
Please do not place stickers or shipping labels on the original manufacturer's package.
The RMA number must be clearly written on the outer box. If you received a label in the email, print the label and tape it to the carton.
Ship via insured ground service with a tracking number. Return shipping charges are the responsibility of the customer. We are not responsible for lost or damaged packages.
Send pre-authorized returns to:

Motion Media, LLC
Attn: RMA#XXXXX
2875 E. Patrick Lane, Suite O
Las Vegas, NV 89120
Alternatively, you may return an item at our office at the above location, with an approved RMA.

Rules:

All returned or exchanged items must be in new condition, unopened in the original box, and must include all packing material, blank warranty cards, manuals, and all accessories.
15% restocking fee on any opened items. If you are going to return, do not open the box.
25% restocking fee on LitePanels, Anton Bauer and Sachtler returns.
Motion Media is not responsible for personal data or items left in returned merchandise.
Defective items may be repaired or exchanged at our discretion for the same model or manufacturer's equivalent model.
RMA numbers are valid for 10 days.
Motion Media is not responsible for any consequential or incidental damage resulting from the sale or use of any merchandise bought from us. We are responsible for the monetary value of the merchandise only.

*No Return/Exchange On:

No Returns on Blackmagic Design purchases.
Any Electronically Delivered Software
3D Printers & Accessories
Custom systems built or modified by Motion Media to customer's specifications
Educational dvd's and books once unwrapped
Motion Media Gift Cards are redeemable for merchandise only and may not be redeemed for cash.

Blackmagic 2110 IP SDI to HDMI 12G-10

ASK AN EXPERT